Traffic Lights

In the world where the 311 Entertainment characters live, the traffic lights work differently than in the real world.

Normal traffic light

Red, yellow, and green mean the same as usual in the real world: stop, slow, and go. The configuration is in this order:

1. Red
2. Red + yellow (warns the light is about to turn green)
3. Green
4. Yellow

If a light is flashing, this is what it means:

• Red: Stop and watch for pedestrians before going. You cannot turn on a flashing red light.
• Yellow: The light is not functional due to a power outage. Use caution, and you can turn if it's safe to do so.
• Green: You are only allowed to go straight. No turning.
• Red + yellow: Light not functional due to a power outage. On this one, you must stop before going, and you cannot turn.

Pedestrian light

The light has 5 states, unlike the usual 2 or 3 in a lot of places.

• DON'T CROSS (Red): Do not cross. To be able to cross, press the button and wait for it to show a green "CROSS".
• CROSS (Green): Cross normally. A number will appear before "CROSS" to show how many seconds you have left to cross, like if it says "15 CROSS", 15 is the number of seconds you have left to cross.
• CROSS (Flashing Yellow): Finish crossing. Usually "CROSS" turns yellow around the 5-10 second mark. If you haven't crossed yet and "CROSS" is yellow, do not start crossing.
• CAUTION (Yellow): Be careful. An emergency vehicle is approaching or there is a reckless driver on the road.
• !!!!!! (Alternating Yellow/Red) or NO CROSSING ALLOWED (Flashing Red): Crossing has been disabled temporarily or is not possible as this time. This may be due to a parade, construction, flooding, an accident, or after a power outage. The latter is more often used, but the former can be used to warn of extreme danger.
• If there is a power outage, the lights are blank, so cross at your own risk.